General Description
The HD22 is a hotel/motel ice dispenser. It is
designed to use a Scotsman C0322 or C0522
cube ice machine as the source for ice.
The HD30 is a wider version of the HD22 and is
designed to use a Scotsman C0330 or C0530
cuber as its source of ice. Additional models may
be used, see sales information for details. Flaked
or nugget ice is not recommended for use in these
dispensers.
Ice from the cuber falls into the insulated hopper,
where it is stored until needed. When a user
pushes the dispense chute a rotating wheel
scoops the ice up to the top front of the hopper
where there is an outlet to the ice chute.
HD22 and HD30
March 2009
Page 2
Model Dimensions
w”xh”xd”
with 6” leg
Basic Electrical
volts/hertz/phase
Model Description Bin Storage
Capacity, ARI rated
HD22B-1A 22 x 53 x 33 ½ 115/60/1 Basic 22” model, 60 Hz 120 lb
HD22B-6A 22 x 53 x 33 ½ 230/50/1 Basic 22” model, 50 Hz 120 lb
HD30B-1A 30 x 53 x 33 ½ 115/60/1 Basic 22” model, 60 Hz 180 lb
HD30N-1A 30 x 53 x 33 ½ 115/60/1 Coin/token model 180 lb
HD30W-1A 30 x 53 x 33 ½ 115/60/1 Water station model 180 lb
HD30B-6A 30 x 53 x 33 ½ 230/50/1 Basic 30” model, 50 Hz 180 lb
All 60 Hz models are supplied with an 11’ power cord, 50 Hz models have a 1.1 meter power cord. Basic
models dispense ice when their chute is pushed. Coin/token models require a coin or token for dispense
activation. Tokens are available from Scotsman, the part number for 500 tokens is KTOKEN. Water station
models are basic models with a separate non-refrigerated water dispense station.
Cuber Model Fits Dispenser Adapter
C0322 or CME306 HD22 None Needed
C0522 or CME456 HD22 None Needed
C0330 or CME256* HD30 None Needed
C0530 or CME506* HD30 None Needed
EH222 or CME686 or CME810 HD22 KBT36
EH222 or CME686 or CME810 HD30 KBT32
* Higher capacity cubers, C0630 or C0830, may also be used, but they require 230 volt power.
New dispenser / used ice machine combinations: Some of the ice machines listed in the table above
used a thermostat when on a dispenser. When re-using the ice machine on an HD22 or HD30, disconnect
and do not use the thermostat.
Prior cubers, CM250, CME250, CM500, CME500, SLC300, SLE300, SLC400, SCE400 are not compatible
with either HD22 or HD30 unless the bin thermostat is used and a thermostat bracket is installed. CM
products use bracket A32262-001, SLC/SLE products use bracket C34196202.
Basic Specifications
(51 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais